Ana içeriğe geç

Huawei P9 Lite Motherboard Shield Removal

Neye ihtiyacın var

  1. Huawei P9 Lite Motherboard Shield Removal, Back Cover: adım 1, 2 resimden 1. Huawei P9 Lite Motherboard Shield Removal, Back Cover: adım 1, 2 resimden 2.
    • Use an opening pick to unclip the rear cover, starting from the bottom corner.

    • Work your way around counterclockwise and carefully pry the plastic tabs open one by one.

  2. Huawei P9 Lite Motherboard Shield Removal: adım 2, 1 resimden 1.
    • There is adhesive underneath the back cover that holds it to the battery and the metal plate at the top.

    • Be careful with the flex cable at the right hand side.

    • Twist the opening pick to lever the back cover away and loosen it from the adhesive.

  3. Huawei P9 Lite Motherboard Shield Removal: adım 3, 1 resimden 1.
    • When the back cover is freed from the adhesive you can pop it off by hand completely.

  4. Huawei P9 Lite Motherboard Shield Removal, Motherboard Shield: adım 4, 1 resimden 1.
    • Remove the nine Phillips #00 screws that secure the metal shield plate.

    • Some screws may be covered with tamper proof stickers. Remove them to ensure a proper seating for your driver.

  5. Huawei P9 Lite Motherboard Shield Removal: adım 5, 2 resimden 1. Huawei P9 Lite Motherboard Shield Removal: adım 5, 2 resimden 2.
    • Do not remove the shield plate yet, it is attached by a connector and an adhered cable.

    • Use a spudger to disconnect the fingerprint sensor from the motherboard.

    • Peel the NFC antenna cable off of the metal plate.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Tobias Isakeit

Üyelik tarihi: 03/31/14

116.710 İtibar

188 adet Kılavuz yazıldı

Ekip

Master Techs Master Techs üyesi

Community

322 Üyeler

2.506 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 13

Her zaman: 5,946