Ana içeriğe geç

Huawei Phone p7 Back Cover Replacement

Neye ihtiyacın var

  1. Huawei Phone p7 Back Cover Replacement, Back Cover: adım 1, 1 resimden 1.
    • Heat to melt the adhesive sticker under the back cover.

  2. Huawei Phone p7 Back Cover Replacement: adım 2, 1 resimden 1.
    • Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.

    • Attention: Be careful with the bottom side because there is the battery flex cable.

  3. Huawei Phone p7 Back Cover Replacement: adım 3, 1 resimden 1.
    • Remove the back cover.

  4. Huawei Phone p7 Back Cover Replacement: adım 4, 1 resimden 1.
    • And you can replace with the new back cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

10 farklı kişi bu kılavuzu tamamladı.

Sophia

Üyelik tarihi: 03/25/14

43.810 İtibar

62 adet Kılavuz yazıldı

Bir Yorum

Is the nfc sensor in the back plate, because i broke the glass and i can see some antennas through the holes. And i think the exposure killed my nfc.

Yoran - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 4

Her zaman: 11,509