Hydration Bladder Leak Repair

Giriş

Hydration backpacks are becoming increasingly popular across a wide range of demographics, from concert goers to hikers, these durable and handy water containers are perfect for taking along on rough terrains and crowded spaces. While their design is sturdy, rough use over time can cause scratches and leaks to make the bag less than optimal for use. In this guide, we show you how to repair it in such a way that you can get at least a few more years of use out of the backpack.

Neye ihtiyacın var

Adım 1 Hydration Bladder Leak Repair

Hydration Bladder Leak Repair, Hydration Bladder Leak Repair: adım 1, 1 resimden 1.

Remove the hydration bladder from inside the backpack.

Düzenle

Adım 2

Check the bladder and pipe to locate any scratches or leaks.
It may help to fill the bladder up with water to check for additional tiny leaks which could be harder to locate than leaks on the pipe.

Düzenle

Adım 3

Rinse out the pipe to clear any clogs.

Düzenle

Adım 4

Cut appropriate size tenacious tape to patch the leak on the bladder.

Düzenle

Adım 5

Seal the leak on the bladder with tenacious tape.
Do not try to use regular tape as it will not seal correctly.
Smooth out all the edges and apply pressure for approximately one to two minutes.

Düzenle

Adım 6

Slide the heat shrink tube over the pipe and hold tightly in place over the ruptured area.

Düzenle

Adım 7

Using a hair dryer, apply heat to shrink the tube until it is tightly sealed in place.
This process may take 20-35 minutes depending on the power of your heat source.

Düzenle

Adım 8

Reinsert the pipe back into the bladder and twist lock it back into place as shown.
Make sure you feel it snap back into place and listen for a "click" sound.

Düzenle