Giriş

Use this guide to replace the Wi-Fi Card of the IBM Thinkpad R40.

Parçalar

Hiçbir parçaya gerek yok.

  1. Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.
    • Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.

  2. Remove the battery from the laptop and place it to the side.
    • Remove the battery from the laptop and place it to the side.

    • Loosen the screw covering the Wi-Fi card panel.

    • Open the now loosened section.

    • Release the clips that hold the Wi-Fi card in place.

    • Remove the Wi-Fi card.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Erin

Üyelik tarihi: 08-09-2011

231 İtibar

2 adet Kılavuz yazıldı

Takım

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 7

Son 30 Gün: 24

Her zaman: 3,400