Ana içeriğe geç

Giriş

If your computer has trouble reading discs and/or the disc drive is not working, it might need to be replaced. This guide will show you step by step how to replace the disc drive.

  1. Place the computer on its side so that the disc drive is facing up.
    • Place the computer on its side so that the disc drive is facing up.

    • Push in the release lever shown.

  2. Once the tab pops out, pull it away from the computer to release the disc drive.
    • Once the tab pops out, pull it away from the computer to release the disc drive.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Pull the disc drive away from the laptop to fully remove it. Pull the disc drive away from the laptop to fully remove it.
    • Pull the disc drive away from the laptop to fully remove it.

  5. Insert new disk drive back into laptop
    • Insert new disk drive back into laptop

  6. Be sure to push the pull tab in as shown in the picture.
    • Be sure to push the pull tab in as shown in the picture.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Kyle

Üyelik tarihi: 18-04-2013

317 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-58, Johann Spring 2013 Cal Poly, Team 8-58, Johann Spring 2013 üyesi

CPSU-JOHANN-S13S8G58

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 7

Her zaman: 825