Parçalar

Hiçbir parçaya gerek yok.

This image shows the track pad which is going to be replaced.
  • This image shows the track pad which is going to be replaced.

Yorum Ekle

Remove the screws with the PH1 bit.
  • Remove the screws with the PH1 bit.

Yorum Ekle

  • With the screws removed, the top part of the keyboard should lift as shown.

Yorum Ekle

  • Remove plug

  • Use a Philips head screwdriver to remove the screws. Two of the screws are located just under the plastic.

Yorum Ekle

  • Once the screws have been removed, the touch pad, and bottom mouse buttons should be ready to replace.

Yorum Ekle

  • Insert the new touchpad and replace the screws with a PH1 bit

Yorum Ekle

  • Reinsert the plug.

Yorum Ekle

  • Re-insert the touch pad panel

  • Replace the screws with a PH1 bit.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Raymond Lawton

Üyelik tarihi: 12-03-2014

173 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 4

Son 30 Gün: 11

Her zaman: 919