Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

Flip the Delphi MyFi XM2GO Device on its back to start the cover-removal process.
  • Flip the Delphi MyFi XM2GO Device on its back to start the cover-removal process.

  • The back cover is the access point for the user-removable battery. Removing the back cover also gives the user access to the hard-reset button.

Yorum Ekle

Locate the large button on the top back of the device. This button is used to release the latch holding the sliding back cover in place. Press this button at the top while making a firm grip on the battery cover. As the button is pressed, move the cover towards the bottom of the device while applying moderate pressure to the cover.
  • Locate the large button on the top back of the device. This button is used to release the latch holding the sliding back cover in place.

  • Press this button at the top while making a firm grip on the battery cover.

  • As the button is pressed, move the cover towards the bottom of the device while applying moderate pressure to the cover.

  • Be careful to not press down too hard on the battery cover as it is made of plastic.

  • The battery removal tab may pop up during the cover removal process.

Yorum Ekle

After the cover is removed, the white Lithium Ion battery is visible.
  • After the cover is removed, the white Lithium Ion battery is visible.

Yorum Ekle

Removing the back cover allows access to the user-removable battery.
  • Removing the back cover allows access to the user-removable battery.

  • Should the battery need to be replaced or swapped, following these steps will aid in the process.

  • The battery comes from the manufacturer with a pull tab with a web address printed on it to direct the user in purchasing a new battery.

  • Holding the device, grab the tab with thumb and index figure.

Yorum Ekle

Pull down on the tab so that the battery block moves a few millimeters towards the bottom of the device. The battery will move parallel to the back of the device while a latch at the top is freed with the downward motion. There is a pivot point at the bottom of the battery where the contacts connect to the battery.
  • Pull down on the tab so that the battery block moves a few millimeters towards the bottom of the device.

  • The battery will move parallel to the back of the device while a latch at the top is freed with the downward motion.

  • There is a pivot point at the bottom of the battery where the contacts connect to the battery.

  • After the latch at the top is disengaged, pivot the battery away from the back and the battery will be free.

Yorum Ekle

With the battery removed, the back of the device reveals more information about the product.
  • With the battery removed, the back of the device reveals more information about the product.

Yorum Ekle

After removing the battery cover and battery, the device information is located near the battery connections highlighted in red.
  • After removing the battery cover and battery, the device information is located near the battery connections highlighted in red.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Scott Byer

Üyelik tarihi: 09-03-2012

61 İtibar

5 adet Kılavuz yazıldı

Takım

Clemson, Team 1-2, Benson Spring 2012 Clemson, Team 1-2, Benson Spring 2012 üyesi

CLEM-BENSON-S12S1G2

3 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 1,293