Eşyalarını Tamir Et Topluluk Mağaza

InFocus Screenplay 4805 Lens Replacement

Giriş

Replace the lens if you are experiencing a lack of an image when the projector is on.

You will need a replacement lens as well as a clean, micro fabric cloth in case the replacement lens needs to be cleaned.

Neye ihtiyacın var

  1. InFocus Screenplay 4805 Lens Replacement, Top Panel: adım 1, 3 resimden 1. InFocus Screenplay 4805 Lens Replacement, Top Panel: adım 1, 3 resimden 2. InFocus Screenplay 4805 Lens Replacement, Top Panel: adım 1, 3 resimden 3.

    • Flip the projector on its back.

    • Use the Phillips #2 screwdriver to remove the (4) four 2 cm gold screws.

    • Use the Phillips #2 screwdriver to remove the (3) three 1 cm silver screws.

    Düzenle

  2. InFocus Screenplay 4805 Lens Replacement: adım 2, 2 resimden 1. InFocus Screenplay 4805 Lens Replacement: adım 2, 2 resimden 2.

    • Turn the projector, facing the back cable board towards you.

    • Using the Phillips #0 screwdriver, remove the (3) three 1.0 cm silver screws on the back panel.

    • Gently take off back cable panel.

    Düzenle

  4. InFocus Screenplay 4805 Lens Replacement: adım 3, 3 resimden 1. InFocus Screenplay 4805 Lens Replacement: adım 3, 3 resimden 2. InFocus Screenplay 4805 Lens Replacement: adım 3, 3 resimden 3.

    • Turn the projector so the front side with the lens is facing you.

    • Gently pry the both of the grey lens rings using the metal spudger.

    Düzenle

  5. InFocus Screenplay 4805 Lens Replacement: adım 4, 1 resimden 1.

    • Now that the screws have been removed, proceed with the removal of the outer panel.

    • Gently remove the front lens panel.

    • Be forewarned, the panel will resist. Be careful not to break the lens.

    Düzenle

  6. InFocus Screenplay 4805 Lens Replacement: adım 5, 1 resimden 1.

    • Being careful not to pull the wires inside the projector, gently lift the top panel off the projector.

    • Rest the lid behind the projector so the insides are exposed and undamaged.

    Düzenle

  7. InFocus Screenplay 4805 Lens Replacement, Lens: adım 6, 3 resimden 1. InFocus Screenplay 4805 Lens Replacement, Lens: adım 6, 3 resimden 2. InFocus Screenplay 4805 Lens Replacement, Lens: adım 6, 3 resimden 3.

    • Using the Phillips #1 screwdriver, remove the (3) three 1cm black screws on the face of the lens.

    • Gently pull out the lens.

    Düzenle
Sonuç

To reassemble the device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 3

Her zaman: 658