Giriş

Follow this guide to remove the access door of an India Mark II for repair or replacement.

  1. Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.
    • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    • Remove the hex head bolt from the top of the access door on the pump head.

    • On reassembly, this bolt should be hand-tight.

    Yorum Ekle

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Pull the access door straight up off the pump head.
    • Pull the access door straight up off the pump head.

    • Store the access door in a sanitary place to prevent contamination.

    Yorum Ekle

    • The access door has a tongue that fits into the base of the pump head.

    • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldberg

Üyelik tarihi: 17-10-2009

394.141 İtibar

412 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

113 Üyeler

7.289 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 3

Son 30 Gün: 7

Her zaman: 335