Ana içeriğe geç

Insignia 6-Quart Pressure Cooker Circuit Board Replacement

Neye ihtiyacın var

  1. Insignia 6-Quart Pressure Cooker Circuit Board Replacement, Circuit Board and Power Cord: adım 1, 1 resimden 1.
    • Use a Phillips head #2 screwdriver to remove the 6mm screw.

  2. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 2, 1 resimden 1.
    • Twist the light grey plastic until the holes align with the blockers.

    • Remove the light grey plastic cover.

  3. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 3, 1 resimden 1.
    • Remove the power cord from the slot it is inserted in.

  4. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 4, 1 resimden 1.
    • Use a Phillips head #2 screwdriver to remove the 22mm screw connected to the black wire.

  5. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 5, 1 resimden 1.
    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the red wire.

  6. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 6, 1 resimden 1.
    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the blue wire.

  7. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 7, 1 resimden 1.
    • Pinch the small white component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

  8. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 8, 1 resimden 1.
    • Pinch the red component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

  9. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 9, 1 resimden 1.
    • Wiggle the wide white component until it is removed from the circuit board.

  10. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 10, 1 resimden 1.
    • Use a J1 head screwdriver to remove the 8mm screws from both sides of the circuit board.

  11. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 11, 1 resimden 1.
    • Use a Phillips head #2 screwdriver to remove both 15mm screws from either side of the circuit board, indicated in the picture.

  12. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 12, 1 resimden 1.
    • Position the pressure cooker so that the circuit board is farther from you then the black, red, and blue wire connections.

    • To the right of the board, use a Phillips head #2 screwdriver to remove the 6mm screw.

  13. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 13, 1 resimden 1.
    • Use a Phillips head #2 screwdriver to remove the 6mm screw behind and to the right of the circuit board tray.

  14. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: adım 14, 1 resimden 1.
    • Remove and replace the circuit board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Savannah Webb

Üyelik tarihi: 01/18/18

657 İtibar

5 adet Kılavuz yazıldı

Ekip

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S12G3

4 Üyeler

5 adet Kılavuz yazıldı

8 Yorum

Where do you purchase the circuit board

Douglas Koons - Yanıt

Hi, thanks for the guide. Where could I purchase the circuit board?

Anthea - Yanıt

Please, Where can I buy the electrical circuit?

Mohammed - Yanıt

why is my circuit board not fixed to the top like in the diagram

david stanley - Yanıt

where can I purchase the circuit board

de27@bellsouth.net - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 3,141