Eşyalarını Tamir Et Topluluk Mağaza

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

Giriş

Rubber gaskets may wear out over time, preventing the lid from closing/opening properly. This guide will show you how to replace the rubber gasket.

  1. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement, Rubber Gasket: adım 1, 1 resimden 1.

    • Remove lid and place upside down on a flat surface.

    Düzenle

  3. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: adım 2, 2 resimden 1. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: adım 2, 2 resimden 2.

    • Grab the edge of the clear rubber gasket and slowly peel it off the lid.

    • Continue peeling off the gasket until it is completely detached from the lid.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Savannah Webb

Üyelik tarihi: 01/18/18

657 İtibar

5 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S12G3

4 Üyeler

5 adet Kılavuz yazıldı

3 Yorum

Am having trouble Turning the lid from Unlock to lock. The pin comes out in the back when I go to turn it from unlock to lock. Can you help me?

pclarkrob3 - Yanıt

I bought the insignia pressure cooker at a garage sale but, the rubber gasket smells bad. I’ve cleaned the entire cooker but, that gasket stinks like no other

Chuck Smith - Yanıt

I am having the same problem as the first comment by pclarkrob3 I am having trouble turning the lid from unlock to lock. These are really crappy instructions!!!! I have only used my pressure cooker twice so everything is still new.

Vivian Lang - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 13

Her zaman: 1,194