Eşyalarını Tamir Et Topluluk Mağaza

Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement

Giriş

This guide will show the required steps to replace the ice tray on the Insignia Ice Maker.

Neye ihtiyacın var

  1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement, Water Tray: adım 1, 3 resimden 1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement, Water Tray: adım 1, 3 resimden 2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement, Water Tray: adım 1, 3 resimden 3.

    • Remove the 6 screws holding the rear casing on.

    • Remove the rear casing

    Düzenle

  2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 2, 3 resimden 1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 2, 3 resimden 2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 2, 3 resimden 3.

    • Remove the 4 screws holding the Ice Tray to the body of the Ice Maker.

    Düzenle

  4. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 3, 3 resimden 1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 3, 3 resimden 2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 3, 3 resimden 3.

    • Remove the 4 screws holding the Ice Tray from the top.

    Düzenle

  5. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 4, 2 resimden 1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 4, 2 resimden 2.

    • Lift the Water Pump out of the way

    Düzenle

  6. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 5, 3 resimden 1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 5, 3 resimden 2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 5, 3 resimden 3.

    • Remove the final 2 screws.

    Düzenle

  7. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 6, 3 resimden 1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 6, 3 resimden 2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: adım 6, 3 resimden 3.

    • Remove the plastic cover from the circuit board by pressing the lever on the side. A pry tool may be required.

    • Disconnect the water tray cord.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Evan Taylor

Üyelik tarihi: 01/18/18

616 İtibar

5 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Cal Poly, Team S21-G3, Banghart Winter 2018 Cal Poly, Team S21-G3, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S21G3

2 Üyeler

5 adet Kılavuz yazıldı

3 Yorum

Where do I find insignia ice maker ns- imp26ss7 replacement ice forming tray? Can't locate item on the internet.

razorbllade - Yanıt

I found a seller on ebay that has 7 of them and is selling them for $20 shipped

er.vanlaarhoven -

https://www.ebay.com/itm/266028470753?ha...

er.vanlaarhoven -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 12

Son 30 gün: 57

Her zaman: 2,933