Eşyalarını Tamir Et Topluluk Mağaza

Insignia NS-CLOPP2 Antenna Replacement

Neye ihtiyacın var

  1. Insignia NS-CLOPP2 Antenna Replacement, Antenna: adım 1, 1 resimden 1.

    • Follow steps on removing the motherboard as a prerequisite.

    • Gently move the motherboard back, revealing the thin black wire that is the antenna. The antenna wire is, on the outside, located on the lower, middle back. Follow the wire from the outside to the inside to make sure it's the correct one.

    Düzenle

  2. Insignia NS-CLOPP2 Antenna Replacement: adım 2, 1 resimden 1.

    • Pull the wire up, making sure it's connected to the motherboard from the back side. To replace the wire, cut it completely from the motherboard.

    Düzenle

  4. Insignia NS-CLOPP2 Antenna Replacement: adım 3, 1 resimden 1.

    • To re-attach the antenna cord to the motherboard, use a soldering tool to connect the wire to the same spot it was originally attached to.

    Düzenle

  5. Insignia NS-CLOPP2 Antenna Replacement: adım 4, 1 resimden 1.

    • Make sure the wire is securely in place in the correct area of the clock, labeled "antenna" from the outside.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Dilini De Silva

Üyelik tarihi: 03/11/15

757 İtibar

5 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Marist, Team 1-1, Laflen Spring 2015 Marist, Team 1-1, Laflen Spring 2015 üyesi

MARS-LAFLEN-S15S1G1

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 110