Eşyalarını Tamir Et Topluluk Mağaza

Insignia NS-CSPBTHOL-R Power Button Replacement

Giriş

Is the power button no longer powering on your device? This guide will help replace the power button so you can turn your speaker on and off.

Neye ihtiyacın var

  1. Insignia NS-CSPBTHOL-R Power Button Replacement, Battery: adım 1, 1 resimden 1.

    • Push the Spudger into the crevice between the grated panel of the speaker and the base of the speaker.

    • Angle the spudger to create a separation between the grate and the base.

    Düzenle

  2. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 2, 1 resimden 1.

    • Slide the spudger along the separation between the grate and the base of the speaker to loosen the grate. Do this to the entire perimeter of the speaker.

    Düzenle

  3. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 3, 2 resimden 1. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 3, 2 resimden 2.

    • Pull the grated panel off.

    Düzenle

  5. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 4, 2 resimden 1. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 4, 2 resimden 2.

    • Remove the six 3mm screws using the J00 JIS screw bit. This will require a long, narrow screwdriver.

    Düzenle

  6. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 5, 2 resimden 1. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 5, 2 resimden 2.

    • Push the spudger into the crevice between the base and the face of the speaker and create a separation.

    • Slide the spudger along the entire perimeter and gently pull off the face of the speaker.

    • The two parts are connected by wires, do not rip them apart.

    Düzenle

  7. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 6, 1 resimden 1.

    • Use the spudger to release the battery by sliding it underneath the battery to create a separation.

    • Remove the battery.

    Düzenle

  8. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 7, 2 resimden 1. Insignia NS-CSPBTHOL-R Power Button Replacement: adım 7, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Pull the motherboard from the base of the speaker.

    • Using tweezers, squeeze and pull on the white plastic clip that connects the battery wires to the motherboard.

    • Unclip the battery from the motherboard.

    Düzenle

  9. Insignia NS-CSPBTHOL-R Power Button Replacement, Power Button: adım 8, 3 resimden 1. Insignia NS-CSPBTHOL-R Power Button Replacement, Power Button: adım 8, 3 resimden 2. Insignia NS-CSPBTHOL-R Power Button Replacement, Power Button: adım 8, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using tweezers, detach the power button from the mother board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Judith Villegas

Üyelik tarihi: 02/15/17

312 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

USF Tampa, Team 12-6, Eyestone Spring 2017 USF Tampa, Team 12-6, Eyestone Spring 2017 üyesi

USFT-EYESTONE-S17S12G6

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 587