Eşyalarını Tamir Et Topluluk Mağaza

Insignia NS-HTMC01-B Fan Replacement

Giriş

This guide will help you replace a broken or damaged internal fan within your Insignia NS-HTMC01-B ceramic heater. A broken or damaged fan can cause your heater to put out lower amounts of heat, or no heat at all.

Neye ihtiyacın var

  1. Insignia NS-HTMC01-B Fan Replacement, Fan: adım 1, 1 resimden 1.

    • Flip your device over so the back panel faces you. You should see a hole containing a screw in each corner of the device.

    • Insert a 4-inch Phillips #1 screwdriver into each hole until connected with the 20 millimeter, sharp-point screw.

    Düzenle

  2. Insignia NS-HTMC01-B Fan Replacement: adım 2, 1 resimden 1.

    • Rotate the screwdriver counter-clockwise until screws are removed.

    • Make sure to firmly connect your screwdriver with the head of the screw. A loose connection can strip the screw head, making the screws impossible to remove.

    • Remove the back panel.

    Düzenle

  4. Insignia NS-HTMC01-B Fan Replacement: adım 3, 1 resimden 1.

    • Unscrew the four 9 millimeter, sharp-point screws holding the fan in place.

    Düzenle

  5. Insignia NS-HTMC01-B Fan Replacement: adım 4, 2 resimden 1. Insignia NS-HTMC01-B Fan Replacement: adım 4, 2 resimden 2.

    • Use tweezers to disconnect the red and black wires.

    • Remove the fan.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Jack Casey

Üyelik tarihi: 01/31/17

231 İtibar

2 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

University of North Texas, Team 1-1, Campbell Spring 2017 University of North Texas, Team 1-1, Campbell Spring 2017 üyesi

UNT-CAMPBELL-S17S1G1

3 Üyeler

12 adet Kılavuz yazıldı

Bir Yorum

But what is the fan size?

William McGroarty - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 282