Eşyalarını Tamir Et Topluluk Mağaza

Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement

Giriş

This guide will take you through the process of replacing the Tip-Over Safety Switch inside the Insignia NS-HTMC01-B.

Neye ihtiyacın var

  1. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement, Front Case: adım 1, 3 resimden 1. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement, Front Case: adım 1, 3 resimden 2. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement, Front Case: adım 1, 3 resimden 3.

    • Flip the device over so the back panel faces up.

    • Unscrew the four screws counter-clockwise from the back panel using a 4mm Phillips screwdriver.

    • You may want to use a flashlight during this step, as the screws are hard to see.

    • Make sure to firmly connect your screwdriver with the head of the screw. A loose connection can strip the screw head, making the screws nearly impossible to remove.

    Düzenle

  2. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement: adım 2, 1 resimden 1.

    • Take the screws out and set them aside.

    • Be sure to set them somewhere flat, so they don't roll away.

    • Gently pull the front panel and back panel apart to open the device.

    Düzenle

  4. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement, Tip-Over Safety Switch: adım 3, 3 resimden 1. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement, Tip-Over Safety Switch: adım 3, 3 resimden 2. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement, Tip-Over Safety Switch: adım 3, 3 resimden 3.

    • Use a Phillips #0 screwdriver to remove the 1.3mm screw on the black rectangle above the Tip-Over Safety Switch.

    Düzenle

  5. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement: adım 4, 3 resimden 1. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement: adım 4, 3 resimden 2. Insignia NS-HTMC01-B Tip-Over Safety Switch Replacement: adım 4, 3 resimden 3.

    • Use a Phillips #2 screwdriver to remove the 0.9mm screw from the back panel of the Tip-Over Safety Switch.

    • Remove the back panel and the Tip-Over Safety Switch.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Rebecca Nunez

Üyelik tarihi: 01/31/17

201 İtibar

2 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

University of North Texas, Team 1-1, Campbell Spring 2017 University of North Texas, Team 1-1, Campbell Spring 2017 üyesi

UNT-CAMPBELL-S17S1G1

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 317