Eşyalarını Tamir Et Topluluk Mağaza

Insignia NS-VCS14SL7 Motor Replacement

Giriş

The Insignia 2-in-1 Handheld/Stick vacuum can lose its ability to create suction. Use this guide to access the vacuum's motor for replacement and troubleshooting.

Neye ihtiyacın var

  1. Insignia NS-VCS14SL7 Motor Replacement, Battery: adım 1, 2 resimden 1. Insignia NS-VCS14SL7 Motor Replacement, Battery: adım 1, 2 resimden 2.

    • Push down the black button to release the dust cup.

    • Pull the dust cup up and away from handheld portion to remove.

    Düzenle

  2. Insignia NS-VCS14SL7 Motor Replacement: adım 2, 3 resimden 1. Insignia NS-VCS14SL7 Motor Replacement: adım 2, 3 resimden 2. Insignia NS-VCS14SL7 Motor Replacement: adım 2, 3 resimden 3.

    • Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.

    • Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.

    Düzenle

  4. Insignia NS-VCS14SL7 Motor Replacement: adım 3, 2 resimden 1. Insignia NS-VCS14SL7 Motor Replacement: adım 3, 2 resimden 2.

    • Pull apart the red and black wires.

    • Do so for all of the wires. (Red x1, Black x2)

    Düzenle

  5. Insignia NS-VCS14SL7 Motor Replacement: adım 4, 1 resimden 1.

    • Remove the tape holding the battery to the black housing.

    • Slide the entire battery bundle out.

    Düzenle

  6. Insignia NS-VCS14SL7 Motor Replacement, Motor: adım 5, 2 resimden 1. Insignia NS-VCS14SL7 Motor Replacement, Motor: adım 5, 2 resimden 2.

    • Use plastic spudger to remove blue wire from motor, freeing the motor.

    Düzenle

  7. Insignia NS-VCS14SL7 Motor Replacement: adım 6, 2 resimden 1. Insignia NS-VCS14SL7 Motor Replacement: adım 6, 2 resimden 2.

    • Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Thibaut Pillot

Üyelik tarihi: 02/15/18

434 İtibar

5 adet Kılavuz yazıldı

Rozetler: 3

Ekip

USF Tampa, Team S16-G3, Boczar Spring 2018 USF Tampa, Team S16-G3, Boczar Spring 2018 üyesi

USFT-BOCZAR-S18S16G3

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 348