Ana içeriğe geç

Giriş

Hate the look of halogen bulbs? Get rid of the dull yellow with a new set of LED license plate lights. Installation is very easy and will only take you a few minutes.

Aletler

Parçalar

Hiçbir parça belirtilmedi.

  1. Take a flat head screwdriver and remove the license plate housing cover. Take a flat head screwdriver and remove the license plate housing cover.
    • Take a flat head screwdriver and remove the license plate housing cover.

  2. Remove the bulb housing.
    • Remove the bulb housing.

  3. Remove the stock license plate bulb. Remove the stock license plate bulb.
    • Remove the stock license plate bulb.

  4. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.
    • Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.

  5. Put everything back the same way it was removed. Put everything back the same way it was removed. Put everything back the same way it was removed.
    • Put everything back the same way it was removed.

Sonuç

You can see from these instructions that installation was very easy. Enjoy your new LED license plate lights.

5 farklı kişi bu kılavuzu tamamladı.

Eric Wu

Üyelik tarihi: 21-01-2015

2.793 İtibar

23 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 6

Son 30 Gün: 13

Her zaman: 1,085