Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

A new Instax Mini 90 Film Cartridge is required for this process. The right size for this camera is 86mm x 54mm. This replacement is simple, but if you do not have the proper film cartridge, you will get an error notification from the camera. To get the most out of your film, keep it in a cool, dry place, and refrain from removing the cartridge while there are still exposures left on it.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

  1. Turn ON the camera, and flip it over so that the back cover is visible.
    • Turn ON the camera, and flip it over so that the back cover is visible.

  2. Unlock the back cover. It should automatically spring open. If there is an old film cartridge loaded in the camera, remove it. Unlock the back cover. It should automatically spring open. If there is an old film cartridge loaded in the camera, remove it. Unlock the back cover. It should automatically spring open. If there is an old film cartridge loaded in the camera, remove it.
    • Unlock the back cover. It should automatically spring open. If there is an old film cartridge loaded in the camera, remove it.

  3. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  4. Unwrap the new film cartridge, taking care to not touch the film inside. Only handle the film cartridge by its plastic shell. Line up the small, yellow line on the cartridge with the corresponding yellow line inside the camera. The yellow line on the cartridge should be facing up, away from the camera. Line up the small, yellow line on the cartridge with the corresponding yellow line inside the camera. The yellow line on the cartridge should be facing up, away from the camera.
    • Unwrap the new film cartridge, taking care to not touch the film inside. Only handle the film cartridge by its plastic shell.

    • Line up the small, yellow line on the cartridge with the corresponding yellow line inside the camera. The yellow line on the cartridge should be facing up, away from the camera.

  5. Close the back cover. The film covering should eject automatically. Close the back cover. The film covering should eject automatically.
    • Close the back cover. The film covering should eject automatically.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Elliott Tegan-Tawney

Üyelik tarihi: 28-02-2017

618 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team S2-G1, Nance Spring 2017 USF Tampa, Team S2-G1, Nance Spring 2017 üyesi

USFT-NANCE-S17S2G1

4 Üyeler

6 adet Kılavuz yazıldı

2 Yorum

Having an issue with the film pack not loading. Have tried resetting, removing battery etc. Any ideas?

Lawrence Cassel - Yanıt

Me too! Ive removed battery, replaced with fresh battery, nothing happens! Ive just used it once! Help!!

susan ahrent - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 gün: 25

Son 30 gün: 138

Her zaman: 5,924