Giriş

This guide details the steps to take off the back cover of your Inter-tel IP 8660 handset.

Parçalar

Hiçbir parçaya gerek yok.

Disconnect the phone cord from the handset jack.
  • Disconnect the phone cord from the handset jack.

Yorum Ekle

Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head. Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.
  • Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.

Yorum Ekle

Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset. Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.
  • Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Juan David GutierrezFranco

Üyelik tarihi: 20-01-2012

67 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-24, Maness Winter 2012 Cal Poly, Team 11-24, Maness Winter 2012 üyesi

CPSU-MANESS-W12S11G24

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Tüm Zamanlar: 554