Ana içeriğe geç

Iomega Z100S2 Case Replacement

Neye ihtiyacın var

  1. Iomega Z100S2 Case Replacement, Case: adım 1, 2 resimden 1. Iomega Z100S2 Case Replacement, Case: adım 1, 2 resimden 2.
    • Push in the plastic tab that can be seen through cracks in the front left corner using a spudger.

  2. Iomega Z100S2 Case Replacement: adım 2, 1 resimden 1.
    • Move down the same side and push in the plastic tab.

  3. Iomega Z100S2 Case Replacement: adım 3, 1 resimden 1.
    • Move to the front right side and once again push in the plastic tab.

    • There is not a fourth tab to push in after this one.

  4. Iomega Z100S2 Case Replacement: adım 4, 2 resimden 1. Iomega Z100S2 Case Replacement: adım 4, 2 resimden 2.
    • Grab the cover by the front side and pull upwards.

    • You might encounter some resistance. Pull firmly, but don't yank it.

  5. Iomega Z100S2 Case Replacement: adım 5, 2 resimden 1. Iomega Z100S2 Case Replacement: adım 5, 2 resimden 2.
    • Tilt the front case down until the pegs detach from the bottom of the case.

    • Lift up and outward.

    • The motherboard will be loose at this point.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Chris Rudolph

Üyelik tarihi: 10/05/10

82 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 7-53, Amido Fall 2010 Cal Poly, Team 7-53, Amido Fall 2010 üyesi

CPSU-AMIDO-F10S7G53

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 4,121