Ana içeriğe geç

Giriş

Is your camera not turning on or turning off? Consider using this guide to replace the power button of your device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.
    • Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Slide off the black aluminum casing.
    • Slide off the black aluminum casing.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.
    • Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.

    • A spring is being held down by the screw. be sure to hold it down.

  5. Lift off the plastic part holding the power button in place.
    • Lift off the plastic part holding the power button in place.

  6. Remove the power button from the device.
    • Remove the power button from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Christopher Brandl

Üyelik tarihi: 09-10-2018

670 İtibar

5 adet Kılavuz yazıldı

Takım

UW Stout, Team S6-G2, Ogden Fall 2018 UW Stout, Team S6-G2, Ogden Fall 2018 üyesi

UWSTOUT-OGDEN-F18S6G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 6

Her zaman: 100