Giriş

If your record/stop switch is not working follow this guide to replace it.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.
    • Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Remove the blue securing the lens cover. Then simply pull off the lens cover itself.
    • Remove the blue securing the lens cover. Then simply pull off the lens cover itself.

    • Remove black aluminum casing as shown.

    • Using a #00 Phillips screwdriver, unscrew the screw securing the record/stop switch.

    • Remove the record/stop switch. You are then able to replace the switch.

    • Be careful to not misplace the power button and spring that will no longer be secured when the switch is removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Christopher Brandl

Üyelik tarihi: 09-10-2018

670 İtibar

5 adet Kılavuz yazıldı

Takım

UW Stout, Team S6-G2, Ogden Fall 2018 UW Stout, Team S6-G2, Ogden Fall 2018 üyesi

UWSTOUT-OGDEN-F18S6G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 12

Her zaman: 49