Eşyalarını Tamir Et Topluluk Mağaza

Ivation IVWPDC20Y Buttons Replacement

Giriş

This guide will show how to replace the buttons on the top of the camera.

Neye ihtiyacın var

  1. Ivation IVWPDC20Y Buttons Replacement, Buttons: adım 1, 1 resimden 1.

    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

    Düzenle

  2. Ivation IVWPDC20Y Buttons Replacement: adım 2, 1 resimden 1.

    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

    Düzenle

  3. Ivation IVWPDC20Y Buttons Replacement: adım 3, 1 resimden 1.

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Düzenle

  4. Ivation IVWPDC20Y Buttons Replacement: adım 4, 1 resimden 1.

    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

    Düzenle

  5. Ivation IVWPDC20Y Buttons Replacement: adım 5, 1 resimden 1.

    • Pry off back outer casing using the black spudger or the blue prying tools

    Düzenle

  7. Ivation IVWPDC20Y Buttons Replacement: adım 6, 1 resimden 1.

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Düzenle

  8. Ivation IVWPDC20Y Buttons Replacement: adım 7, 1 resimden 1.

    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

    Düzenle

  9. Ivation IVWPDC20Y Buttons Replacement: adım 8, 1 resimden 1.

    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

    Düzenle

  10. Ivation IVWPDC20Y Buttons Replacement: adım 9, 1 resimden 1.

    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver bit

    Düzenle

  11. Ivation IVWPDC20Y Buttons Replacement: adım 10, 1 resimden 1.

    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

    Düzenle

  12. Ivation IVWPDC20Y Buttons Replacement: adım 11, 1 resimden 1.

    • Use the metal prying tool to lift off the cover of the buttons

    Düzenle

  13. Ivation IVWPDC20Y Buttons Replacement: adım 12, 1 resimden 1.

    • Use the PH00 bit to remove the four screws on the metal plate around the buttons

    Düzenle

  14. Ivation IVWPDC20Y Buttons Replacement: adım 13, 1 resimden 1.

    • Finally, use the plastic spudger to push buttons out, and then replace them

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Alex

Üyelik tarihi: 02/08/16

228 İtibar

2 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

USF Tampa, Team 6-6, Eyestone Spring 2016 USF Tampa, Team 6-6, Eyestone Spring 2016 üyesi

USFT-EYESTONE-S16S6G6

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 4

Her zaman: 360