Eşyalarını Tamir Et Topluluk Mağaza

Ivation IVWPDC20Y Lens Assembly Replacement

Giriş

This guide will show you how to replace a faulty lens unit for this camera.

Neye ihtiyacın var

  1. Ivation IVWPDC20Y Lens Assembly Replacement, Lens Assembly: adım 1, 1 resimden 1.

    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

    Düzenle

  2. Ivation IVWPDC20Y Lens Assembly Replacement: adım 2, 1 resimden 1.

    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

    Düzenle

  3. Ivation IVWPDC20Y Lens Assembly Replacement: adım 3, 1 resimden 1.

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Düzenle

  4. Ivation IVWPDC20Y Lens Assembly Replacement: adım 4, 1 resimden 1.

    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

    Düzenle

  6. Ivation IVWPDC20Y Lens Assembly Replacement: adım 5, 1 resimden 1.

    • Pry off back outer casing using the black spudger or the blue prying tools

    Düzenle

  7. Ivation IVWPDC20Y Lens Assembly Replacement: adım 6, 1 resimden 1.

    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

    Düzenle

  8. Ivation IVWPDC20Y Lens Assembly Replacement: adım 7, 1 resimden 1.

    • Using the poker end of the spudger push gently on the black pegs holding the orange tape in place

    • Screen and orange tape should slip out as a whole

    Düzenle

  9. Ivation IVWPDC20Y Lens Assembly Replacement: adım 8, 1 resimden 1.

    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

    Düzenle

  10. Ivation IVWPDC20Y Lens Assembly Replacement: adım 9, 1 resimden 1.

    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver

    Düzenle

  11. Ivation IVWPDC20Y Lens Assembly Replacement: adım 10, 1 resimden 1.

    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

    Düzenle

  12. Ivation IVWPDC20Y Lens Assembly Replacement: adım 11, 1 resimden 1.

    • Remove the two screws holding the lens assembly to the motherboard using the PH00 bit screwdriver

    Düzenle

  13. Ivation IVWPDC20Y Lens Assembly Replacement: adım 12, 1 resimden 1.

    • Remove the soldering on the 3 wires that are connected to the lens unit

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Jack Schlandt

Üyelik tarihi: 02/08/16

197 İtibar

1 Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

USF Tampa, Team 6-6, Eyestone Spring 2016 USF Tampa, Team 6-6, Eyestone Spring 2016 üyesi

USFT-EYESTONE-S16S6G6

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 7

Her zaman: 280