Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

JBL Charge 2 Motherboard Replacement

Giriş

How to disassemble the JBL Charge 2 for a motherboard replacement.

Neye ihtiyacın var

  1. JBL Charge 2 Motherboard Replacement, Battery: adım 1, 1 resimden 1.

    • Remove the screen cover from the speaker using a metal spudger.

    Düzenle

  2. JBL Charge 2 Motherboard Replacement: adım 2, 2 resimden 1. JBL Charge 2 Motherboard Replacement: adım 2, 2 resimden 2.

    • Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.

    • Remove the end cap of the device. Repeat the same process to remove the other end cap.

    Düzenle

  3. JBL Charge 2 Motherboard Replacement: adım 3, 2 resimden 1. JBL Charge 2 Motherboard Replacement: adım 3, 2 resimden 2.

    • To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.

    • Twist off the end cap and remove them from the device.

    Düzenle

  4. JBL Charge 2 Motherboard Replacement: adım 4, 2 resimden 1. JBL Charge 2 Motherboard Replacement: adım 4, 2 resimden 2.

    • Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.

    • Pry away the plastic battery cover with a plastic spudger.

    Düzenle

  5. JBL Charge 2 Motherboard Replacement: adım 5, 1 resimden 1.

    • Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

    Düzenle

  6. JBL Charge 2 Motherboard Replacement: adım 6, 3 resimden 1. JBL Charge 2 Motherboard Replacement: adım 6, 3 resimden 2. JBL Charge 2 Motherboard Replacement: adım 6, 3 resimden 3.

    • Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.

    • Slide the battery free.

    Düzenle

  8. JBL Charge 2 Motherboard Replacement, Speakers: adım 7, 1 resimden 1.

    • Remove the opposite screen cover using a metal spudger

    Düzenle

  9. JBL Charge 2 Motherboard Replacement: adım 8, 1 resimden 1.

    • Use the Phillips #1 screwdriver (PH1) to remove the (8) eight screws.

    • Pull out the speakers from the device.

    Düzenle

  10. JBL Charge 2 Motherboard Replacement: adım 9, 1 resimden 1.

    • Disconnect the wiring from the speaker by using the fine tip pry tool.

    • Remove the speakers from the device.

    Düzenle

  11. JBL Charge 2 Motherboard Replacement, Motherboard: adım 10, 1 resimden 1.

    • Use a spudger to disconnect the gold antenna connector from the main circuit board.

    Düzenle

  12. JBL Charge 2 Motherboard Replacement: adım 11, 1 resimden 1.

    • Disconnect the microphone connector using the plastic opening tool.

    Düzenle

  13. JBL Charge 2 Motherboard Replacement: adım 12, 1 resimden 1.

    • Use a plastic opening tool to disconnect the 3.5 mm headphone connector.

    Düzenle

  14. JBL Charge 2 Motherboard Replacement: adım 13, 1 resimden 1.

    • Disconnect micro-b connector with a plastic opening tool.

    Düzenle

  15. JBL Charge 2 Motherboard Replacement: adım 14, 1 resimden 1.

    • Remove the connector to the USB connector using a plastic opening tool.

    Düzenle

  16. JBL Charge 2 Motherboard Replacement: adım 15, 1 resimden 1.

    • Remove the speaker wires from the control panel by prying off with a plastic opening tool.

    Düzenle

  17. JBL Charge 2 Motherboard Replacement: adım 16, 1 resimden 1.

    • Next, disconnect the control-panel ribbon by prying out the grey plastic tab using a plastic opening tool. The ribbon should freely come out afterwards.

    Düzenle

  18. JBL Charge 2 Motherboard Replacement: adım 17, 3 resimden 1. JBL Charge 2 Motherboard Replacement: adım 17, 3 resimden 2. JBL Charge 2 Motherboard Replacement: adım 17, 3 resimden 3.

    • Caution: Touching the capacitors will short out the circuit board. Push on the end of the circuit board and carefully keep thumbs on foam insulation on ends of board.

    • Remove the motherboard from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Mauzor Ilonzo

Üyelik tarihi: 09/26/17

495 İtibar

3 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

USF Tampa, Team S2-G4, Passmore Fall 2017 USF Tampa, Team S2-G4, Passmore Fall 2017 üyesi

USFT-PASSMORE-F17S2G4

4 Üyeler

8 adet Kılavuz yazıldı

2 Yorum

Guten Tag

Vielen Dank für die prima Anleitung!

Ich habe den Fehler bei meinem Charge 2+ gefunden. Das Bauteil mit der 100 drauf ist außen mehrfach gerissen. Was ist das für ein Bauteil und kann ich das bestellen?

Liebe Grüße

Stefan

Stefan Erb - Yanıt

Hello i have a problem with component 100 but i don't now what is ? someone can help me thanks and from were can i order ?

naskicha_94 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 12

Son 30 gün: 62

Her zaman: 8,195