Eşyalarını Tamir Et Topluluk Mağaza

JBL Everest Elite 300 Headphone Jack Replacement

Giriş

Headphones not connecting to the auxiliary? This may be caused by the headphone jack. Here's a guide to replace it. All you will need is a Phillips #00 screwdriver, a soldering iron, and an iFixit opening tool.

Neye ihtiyacın var

  1. JBL Everest Elite 300 Headphone Jack Replacement, Speaker: adım 1, 1 resimden 1.

    • Remove the ear pad with an opening pick.

    Düzenle

  2. JBL Everest Elite 300 Headphone Jack Replacement: adım 2, 1 resimden 1.

    • Reveal the speaker.

    Düzenle

  4. JBL Everest Elite 300 Headphone Jack Replacement: adım 3, 1 resimden 1.

    • Remove the 4.5 mm screws using the Phillips #00 screwdriver.

    Düzenle

  5. JBL Everest Elite 300 Headphone Jack Replacement: adım 4, 1 resimden 1.

    • Pull apart the bronze speaker away from the headphones carefully to reveal the wiring.

    • Desolder the motherboard speaker connection.

    Düzenle

  6. JBL Everest Elite 300 Headphone Jack Replacement, Headphone Jack: adım 5, 1 resimden 1.

    • Unscrew the circuit board connected to the headphone jack.

    Düzenle

  7. JBL Everest Elite 300 Headphone Jack Replacement: adım 6, 1 resimden 1.

    • Desolder the cables connecting the headphone jack board to the headphones.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Breanna Davis

Üyelik tarihi: 09/13/23

317 İtibar

2 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

University of North Texas, Team 1-2, Kilpatrick Fall 2023 University of North Texas, Team 1-2, Kilpatrick Fall 2023 üyesi

UNT-KILPATRICK-F23S1G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 49