Ana içeriğe geç

JBL L26 Speaker Replacement

Neye ihtiyacın var

  1. JBL L26 Speaker Replacement, Speaker: adım 1, 1 resimden 1.
    • Remove the four 6.4 mm Phillips #2 screws from the front of the speaker.

  2. JBL L26 Speaker Replacement: adım 2, 1 resimden 1.
    • Pull the speaker out of the frame and lay it onto the side.

  3. JBL L26 Speaker Replacement: adım 3, 1 resimden 1.
    • Unlatch the green wire by pulling on the terminal connector and not the wire.

  4. JBL L26 Speaker Replacement: adım 4, 2 resimden 1. JBL L26 Speaker Replacement: adım 4, 2 resimden 2.
    • Use a small prying tool to pry the terminal connector off of the tap.

    • After you unlatched both edges, pull the black wire out.

  5. JBL L26 Speaker Replacement: adım 5, 1 resimden 1.
    • Get your replacement speaker and connect the green wire by pushing the terminal connector onto the tap.

  6. JBL L26 Speaker Replacement: adım 6, 2 resimden 1. JBL L26 Speaker Replacement: adım 6, 2 resimden 2.
    • Connect the black wire by attaching the terminal connector onto the tap.

    • Use a clamping tool to clip the edges toward the tap.

    • Be careful not to clamp too hard so you don't damage the tap.

  7. JBL L26 Speaker Replacement: adım 7, 1 resimden 1.
    • Place the new speaker onto the frame and screw the four 6.4 mm Phillips #2 screws back in.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Nathnael Dubale

Üyelik tarihi: 09/20/20

269 İtibar

1 Kılavuz yazıldı

Ekip

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 21

Her zaman: 1,047