Ana içeriğe geç

JBL Pulse Outer Casing Replacement

Neye ihtiyacın var

  1. JBL Pulse Outer Casing Replacement, Button Board: adım 1, 1 resimden 1.
    • Use a plastic opening tool to pry around the edges of the circular rubber panel.

  2. JBL Pulse Outer Casing Replacement: adım 2, 1 resimden 1.
    • Once the edges are loose, pull off the rubber button panel completely.

    • New adhesive will have to be applied when reassembling.

  3. JBL Pulse Outer Casing Replacement: adım 3, 1 resimden 1.
    • Use your plastic opening tool to pry the button board loose by lifting the edges.

  4. JBL Pulse Outer Casing Replacement: adım 4, 1 resimden 1.
    • Lift the button board, exposing the attached cable.

    • New adhesive will have to be applied when reassembling.

  5. JBL Pulse Outer Casing Replacement: adım 5, 1 resimden 1.
    • Pull black piece on top of socket away from board to loosen, then detach the cable.

  6. JBL Pulse Outer Casing Replacement, Outer Casing: adım 6, 3 resimden 1. JBL Pulse Outer Casing Replacement, Outer Casing: adım 6, 3 resimden 2. JBL Pulse Outer Casing Replacement, Outer Casing: adım 6, 3 resimden 3.
    • Take out the four 9mm black PH0 screws from the top and bottom of the device.

    • Pull off cap by hand.

    • The outer casing can now be removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Maxwell Busenbarrick

Üyelik tarihi: 09/15/16

1.353 İtibar

7 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 18-6, Blackwell Fall 2016 USF Tampa, Team 18-6, Blackwell Fall 2016 üyesi

USFT-BLACKWELL-F16S18G6

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 16

Her zaman: 2,561