Eşyalarını Tamir Et Topluluk Mağaza

Jensen JTA-230 Volume Knob Replacement

Giriş

The volume knob controls the noise intensity and quality of the music being played. The replacement is easy and requires no tools because the knob is not permanently attached to the device.

  1. Jensen JTA-230 Volume Knob Replacement, Volume Knob: adım 1, 1 resimden 1.

    • Carefully place on a table where it will hold a lot of pressure

    Düzenle

  3. Jensen JTA-230 Volume Knob Replacement: adım 2, 1 resimden 1.

    • Next, using your thumb and finger, get a good grasp on the volume knob, and carefully but forcefully pull on it and it will pop off.

    Düzenle

  4. Jensen JTA-230 Volume Knob Replacement: adım 3, 1 resimden 1.

    • Next, take your new volume knob and simply pop it back into place the same way you took the old one off, and you are good to go.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Louis Varrichione

Üyelik tarihi: 03/11/16

309 İtibar

2 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

UMass Dartmouth, Team 8-8, Botvin Spring 2016 UMass Dartmouth, Team 8-8, Botvin Spring 2016 üyesi

UMASSD-BOTVIN-S16S8G8

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 460