Eşyalarını Tamir Et Topluluk Mağaza

John Frieda JFHA5R Reset and Test Buttons Replacement

Giriş

The reset and test buttons can stop working over time. This replacement guide will show how to properly replace the reset and test buttons.

Neye ihtiyacın var

  1. John Frieda JFHA5R Reset and Test Buttons Replacement, Reset and Test Buttons: adım 1, 1 resimden 1.

    • Make sure the Salon Shape brush is unplugged, and do not use metals once you have pried open the power plug.

    • Unscrew the two screws using a 3.0 mm bit triangle head on the back of the power plug.

    Düzenle

  2. John Frieda JFHA5R Reset and Test Buttons Replacement: adım 2, 1 resimden 1.

    • Use the spudger along either side to open up the power plug.

    • As the power plug is opened, the caution sticker on top of the plug will rip.

    Düzenle

  4. John Frieda JFHA5R Reset and Test Buttons Replacement: adım 3, 1 resimden 1.

    • Slide slightly up to remove the back cover of the power plug.

    Düzenle

  5. John Frieda JFHA5R Reset and Test Buttons Replacement: adım 4, 1 resimden 1.

    • Remove the red reset button by pulling it to the right.

    Düzenle

  6. John Frieda JFHA5R Reset and Test Buttons Replacement: adım 5, 1 resimden 1.

    • Pull slightly left then up to remove the yellow test button.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Lindsey Farley

Üyelik tarihi: 11/08/17

113 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

IUPUI, Team S5-G1, Baechle Fall 2017 IUPUI, Team S5-G1, Baechle Fall 2017 üyesi

IUPUI-BAECHLE-F17S5G1

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 9

Her zaman: 468