Ana içeriğe geç

Giriş

Before you begin, you will need a flathead screwdriver, thread, and a 175X7 size 18 sewing needle.

  1. Pass the thread through the needle eye.
    • Pass the thread through the needle eye.

  2. Loop the threading through the two tension posts, making sure you stay in the grooves of the wheels.
    • Loop the threading through the two tension posts, making sure you stay in the grooves of the wheels.

  3. Continue the threading, weaving through the pull-off lever.
    • Continue the threading, weaving through the pull-off lever.

  4. Dizüstü Bilgisayar Bataryaları

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Hemen Alışveriş Yapın
  5. Adjust the thread pull-off lever as well as adjust the position of the nipper bar block to the left or the right. Adjust the thread pull-off lever as well as adjust the position of the nipper bar block to the left or the right.
    • Adjust the thread pull-off lever as well as adjust the position of the nipper bar block to the left or the right.

  6. Tighten the thread on the top loop near the nipper releasing knurled thumb nut.
    • Tighten the thread on the top loop near the nipper releasing knurled thumb nut.

  7. Weave threading through the working arm and have it ready to insert through the eye of the needle.
    • Weave threading through the working arm and have it ready to insert through the eye of the needle.

  8. Again, keep the thread along the groove of the wheel before slipping it through the eye of the needle.
    • Again, keep the thread along the groove of the wheel before slipping it through the eye of the needle.

  9. Using the flathead screwdriver, slide the needle up into the slot, with the indented side facing in and tighten until the needle cannot shift.
    • Using the flathead screwdriver, slide the needle up into the slot, with the indented side facing in and tighten until the needle cannot shift.

  10. Insert the thread through the eye of the needle, and you are ready for sewing.
    • Insert the thread through the eye of the needle, and you are ready for sewing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 11