Eşyalarını Tamir Et Topluluk Mağaza

KYVOL CYBOVAC E20 HEPA Filter Replacement

Giriş

If your Kyvol Cybovac E20 is not cleaning well, the filter may be the issue. The HEPA filter inside the vacuum needs to be cleaned every 2 weeks, but needs to be replaced every 2 months. Follow this guide to replace the HEPA filter.

  1. KYVOL CYBOVAC E20 HEPA Filter Replacement, HEPA Filter: adım 1, 2 resimden 1. KYVOL CYBOVAC E20 HEPA Filter Replacement, HEPA Filter: adım 1, 2 resimden 2.

    • Empty the dust bin before beginning.

    • Start by placing the vacuum on a flat surface.

    • Flip the vacuum over with the dust bin facing you.

    Düzenle

  2. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 2, 2 resimden 1. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 2, 2 resimden 2.

    • Remove the dust bin.

    • Flip the dust bin over so you can see the filter compartment.

    Düzenle

  4. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 3, 2 resimden 1. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 3, 2 resimden 2.

    • Open the hatch to the filter compartment.

    Düzenle

  5. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 4, 1 resimden 1.

    • Take out the plastic case with the filter inside.

    Düzenle

  6. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 5, 2 resimden 1. KYVOL CYBOVAC E20 HEPA Filter Replacement: adım 5, 2 resimden 2.

    • Pry open the plastic casing.

    • Pull up the white tab to remove the current filter.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 151