Eşyalarını Tamir Et Topluluk Mağaza

KYVOL CYBOVAC E20 Main Brush Replacement

Giriş

The Kyvol Cybovac E20 has a main rolling brush that may stop functioning over time from use. The brush should be taken out and cleaned, but if this does not work, the brush may be broken. If your vacuum is not cleaning well, use this guide to replace a broken main brush.

  1. KYVOL CYBOVAC E20 Main Brush Replacement, Main Brush: adım 1, 1 resimden 1.

    • Turn vacuum off and lay on flat surface.

    Düzenle

  2. KYVOL CYBOVAC E20 Main Brush Replacement: adım 2, 2 resimden 1. KYVOL CYBOVAC E20 Main Brush Replacement: adım 2, 2 resimden 2.

    • Turn vacuum over and identify the main brush compartment.

    Düzenle

  4. KYVOL CYBOVAC E20 Main Brush Replacement: adım 3, 1 resimden 1.

    • Take off the orange cover guarding the brush

    Düzenle

  5. KYVOL CYBOVAC E20 Main Brush Replacement: adım 4, 1 resimden 1.

    • Remove the main brush from the vacuum by pulling it out.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Hailee Ledgerwood

Üyelik tarihi: 02/09/23

109 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

University of North Texas, Team 2-5, Saru Jimmy Spring 2023 University of North Texas, Team 2-5, Saru Jimmy Spring 2023 üyesi

UNT-SARU JIMMY-S23S2G5

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 158