Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Use this guide to replace a worn drive belt in a Kenmore 110 Series Washing Machine.

Parçalar

Hiçbir parça belirtilmedi.

  1. To avoid risk of electric shock, unplug the washing machine.
    • To avoid risk of electric shock, unplug the washing machine.

    • Lay the washing machine on its back.

  2. Using a 5/16" socket wrench, remove both screws from the belt cover. Remove the belt cover from the washer. Remove the belt cover from the washer.
    • Using a 5/16" socket wrench, remove both screws from the belt cover.

    • Remove the belt cover from the washer.

  3. Using a 1/2" socket, remove the bolt securing the drive pulley. Remove the drive pulley and belt. When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.
    • Using a 1/2" socket, remove the bolt securing the drive pulley.

    • Remove the drive pulley and belt.

    • When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.

Sonuç

To reassemble your device, follow these instructions in reverse order.

12 farklı kişi bu kılavuzu tamamladı.

Robert Trout

Üyelik tarihi: 26-09-2012

971 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 üyesi

CPSU-FORTE-F12S15G43

5 Üyeler

10 adet Kılavuz yazıldı

2 Yorum

What would be reason that rinse cycle doesn't spin and it leaks

lauraleahenquinette - Yanıt

Will the drive belt make a clicking/grinding noise? I originally thought it was just a slipping noise, but empty it does make the grinding noise.

Gary Long Jr - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 133

Son 30 gün: 546

Her zaman: 90,148