Ana içeriğe geç

Kenmore 110 Series Washing Machine Electronic Control Replacement

Neye ihtiyacın var

  1. Kenmore 110 Series Washing Machine Electronic Control Replacement, Electronic Control: adım 1, 1 resimden 1.
    • Unplug the washing machine!

    • Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.

    • Lifting from the rear, remove the top panel.

    • The top panel will still be connected by wires and hoses. It will help if you have a flat raised surface to set the top panel on.

  2. Kenmore 110 Series Washing Machine Electronic Control Replacement: adım 2, 3 resimden 1. Kenmore 110 Series Washing Machine Electronic Control Replacement: adım 2, 3 resimden 2. Kenmore 110 Series Washing Machine Electronic Control Replacement: adım 2, 3 resimden 3.
    • Using a 5/16" socket wrench or a hand wrench, remove the two screws from the component cover.

    • From the bottom, pull out and remove the component cover.

  3. Kenmore 110 Series Washing Machine Electronic Control Replacement: adım 3, 2 resimden 1. Kenmore 110 Series Washing Machine Electronic Control Replacement: adım 3, 2 resimden 2.
    • Carefully remove the three wire harnesses.

    • With a phillips head screwdriver, remove the three mounting screws.

Sonuç

To reassemble your device, follow these instructions in reverse order.

10 farklı kişi bu kılavuzu tamamladı.

Robert Trout

Üyelik tarihi: 09/26/12

1.234 İtibar

5 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 üyesi

CPSU-FORTE-F12S15G43

5 Üyeler

11 adet Kılavuz yazıldı

3 Yorum

the machine is not completing the wash cycle. stop in the rinse and spin cycle.

is there a fix for this?

R Snagg - Yanıt

I am having the same problem. Did you ever find a fix?

Paul Bennett -

Did anyone find a fix for this problem?

Ron Rafe - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 43

Son 30 gün: 129

Her zaman: 27,560