Giriş

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

Aletler

Parçalar

Hiçbir parçaya gerek yok.

  1. Unplug the washing machine!
    • Unplug the washing machine!

    • Carefully lay washing machine on its back.

  2. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. Carefully remove both wire harnesses connected to the pump. Squeeze and pull back hose clamp. Twist drain hose off of pump.
    • Carefully remove both wire harnesses connected to the pump.

    • Squeeze and pull back hose clamp.

    • Twist drain hose off of pump.

    • Using a 1/4" socket wrench, remove the three mounting screws.

    • Pull the pump out of place.

    • Pulling the pump away takes a little force.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 başka kişi bu kılavuzu tamamladı.

Robert Trout

Üyelik tarihi: 26-09-2012

840 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 üyesi

CPSU-FORTE-F12S15G43

5 Üyeler

5 adet Kılavuz yazıldı

3 Yorum

i have a speed problem with my washer ...

http://tristaterepairs.com/dryer-repair....

Andre Matthew - Yanıt

please provide info on how to test the water pump once it's removed...

Oscar Ramos - Yanıt

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - Yanıt

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 Gün: 58

Son 30 Gün: 348

Her zaman: 37,433