Giriş
Here we have a Kenmore 90 Series that will not start its spin cycle. This occurs when the motor coupler connected to the drive motor has been worn over time. In this guide, you will will learn the step-by-step process of replacing this component. Prior to beginning your repair, be sure to unplug the washing machine.
Neye ihtiyacın var
-
-
Using a flat head screwdriver, gently wedge the end caps off of the control console in order to open it up.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
2 farklı kişi bu kılavuzu tamamladı.