Ana içeriğe geç

Giriş

If the LCD screen in the KDC-BT565U is not displaying text properly, or suffering from too much fading/dimness, it could be a sign that the screen needs replacing. This guide shows you how to easily replace this LCD screen.

  1. Press the eject button on the bottom left corner of the face plate.
    • Press the eject button on the bottom left corner of the face plate.

  2. Begin by slightly lifting the face plate out from the side located by the release button. Slide towards the side of the eject button, then completely lift out. Slide towards the side of the eject button, then completely lift out.
    • Begin by slightly lifting the face plate out from the side located by the release button.

    • Slide towards the side of the eject button, then completely lift out.

  3. Remove the four 7.5mm Phillips #0 screws on the back of the face-plate.
    • Remove the four 7.5mm Phillips #0 screws on the back of the face-plate.

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Hemen Alışveriş Yapın

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Hemen Alışveriş Yapın
  5. Use a spudger or prying tool to open the back of the face plate. Pry the back at multiple points around the edge of the face plate. This will take some patience. Applying too much force risks breaking the plastic. Use a spudger or prying tool to open the back of the face plate. Pry the back at multiple points around the edge of the face plate. This will take some patience. Applying too much force risks breaking the plastic.
    • Use a spudger or prying tool to open the back of the face plate. Pry the back at multiple points around the edge of the face plate. This will take some patience. Applying too much force risks breaking the plastic.

  6. Lift and remove the motherboard to reveal the inside of the front panel. You might need to pry the right side up with the spudger.
    • Lift and remove the motherboard to reveal the inside of the front panel.

    • You might need to pry the right side up with the spudger.

  7. Use the plastic spudger to straighten out the six pegs to allow the removal of the LCD screen. Make sure to use an ESD-safe prying tool when working on electrical boards. Here, we are using a plastic tool, not a metal one. Make sure to use an ESD-safe prying tool when working on electrical boards. Here, we are using a plastic tool, not a metal one.
    • Use the plastic spudger to straighten out the six pegs to allow the removal of the LCD screen.

    • Make sure to use an ESD-safe prying tool when working on electrical boards. Here, we are using a plastic tool, not a metal one.

  8. Lift the LCD screen to remove and replace it. Lift the LCD screen to remove and replace it. Lift the LCD screen to remove and replace it.
    • Lift the LCD screen to remove and replace it.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yusef Flowers

Üyelik tarihi: 15-02-2017

137 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team S2-G5, Lacy Spring 2017 USF Tampa, Team S2-G5, Lacy Spring 2017 üyesi

USFT-LACY-S17S2G5

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 231