Eşyalarını Tamir Et Topluluk Mağaza

Keurig B70 Platinum Puncture Needle Replacement

Giriş

If your puncture needle is damaged or dulled, follow this guide to safely remove and replace the puncture needle. The puncture needle is sharp so try to only touch the plastic holding the puncture needle. To complete the replacement, you will need a T15 Torx screwdriver, a Phillips #0 screwdriver, and a Phillips #2 screwdriver.

Neye ihtiyacın var

  1. Keurig B70 Platinum Puncture Needle Replacement, Brewer Handle: adım 1, 3 resimden 1. Keurig B70 Platinum Puncture Needle Replacement, Brewer Handle: adım 1, 3 resimden 2. Keurig B70 Platinum Puncture Needle Replacement, Brewer Handle: adım 1, 3 resimden 3.

    • Turn off and unplug the Keurig before starting.

    • Lay the Keurig on its back and open the lid.

    • Using a Phillips #2 screwdriver, remove the two 21.0 mm screws.

    • Be careful when removing the screws. There is a sharp puncture needle!

    • You may need to use tweezers to get the screws out.

    Düzenle

  2. Keurig B70 Platinum Puncture Needle Replacement: adım 2, 2 resimden 1. Keurig B70 Platinum Puncture Needle Replacement: adım 2, 2 resimden 2.

    • Using a T15 Torx screwdriver, remove the two 29.0 mm screws on each ends of the handle.

    Düzenle

  3. Keurig B70 Platinum Puncture Needle Replacement: adım 3, 2 resimden 1. Keurig B70 Platinum Puncture Needle Replacement: adım 3, 2 resimden 2.

    • Lift and pull the black plastic cover away from the Keurig.

    Düzenle

  5. Keurig B70 Platinum Puncture Needle Replacement: adım 4, 1 resimden 1.

    • Push the handle back and upward to detach it from the Keurig.

    Düzenle

  6. Keurig B70 Platinum Puncture Needle Replacement, Puncture Needle: adım 5, 2 resimden 1. Keurig B70 Platinum Puncture Needle Replacement, Puncture Needle: adım 5, 2 resimden 2.

    • Using a Phillips #0 screwdriver, remove the two 7.0 mm screws located on the sides of the tube near the puncture needle.

    Düzenle

  7. Keurig B70 Platinum Puncture Needle Replacement: adım 6, 2 resimden 1. Keurig B70 Platinum Puncture Needle Replacement: adım 6, 2 resimden 2.

    • Using both hands, pull the puncture needle tube and the Keurig tube apart to disconnect the tubes.

    • Don't be afraid to pull hard! The tubes are tightly connected.

    Düzenle

  8. Keurig B70 Platinum Puncture Needle Replacement: adım 7, 2 resimden 1. Keurig B70 Platinum Puncture Needle Replacement: adım 7, 2 resimden 2.

    • Slide the black plastic ring, which holds the puncture needle tube down, off of the tube.

    Düzenle

  9. Keurig B70 Platinum Puncture Needle Replacement: adım 8, 3 resimden 1. Keurig B70 Platinum Puncture Needle Replacement: adım 8, 3 resimden 2. Keurig B70 Platinum Puncture Needle Replacement: adım 8, 3 resimden 3.

    • Using a Phillips #2 screwdriver, remove the two 9.0 mm screws next to the detached tube.

    • Hold on to the puncture needle when removing the screws to ensure that the puncture needle does not fall and cause injury.

    Düzenle

  10. Keurig B70 Platinum Puncture Needle Replacement: adım 9, 3 resimden 1. Keurig B70 Platinum Puncture Needle Replacement: adım 9, 3 resimden 2. Keurig B70 Platinum Puncture Needle Replacement: adım 9, 3 resimden 3.

    • Gently pull the puncture needle down and out from the Keurig.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Steven Tran

Üyelik tarihi: 10/14/18

329 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UW Tacoma, Team S1-G6, Rose Fall 2018 UW Tacoma, Team S1-G6, Rose Fall 2018 üyesi

UWT-ROSE-F18S1G6

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 11

Her zaman: 1,103