Ana içeriğe geç

Keurig K40 Top Water Pump Replacement

Neye ihtiyacın var

  1. Keurig K40 Top Water Pump Replacement, Top Water Pump: adım 1, 1 resimden 1.
    • Begin by removing the top cover from the device.

    • Remove the cover by gently rocking it back and forth with an emphasis on lowering the left side underneath an internal peg.

  2. Keurig K40 Top Water Pump Replacement: adım 2, 1 resimden 1.
    • Unscrew both 1.5mm screws located on the water pump.

  3. Keurig K40 Top Water Pump Replacement: adım 3, 2 resimden 1. Keurig K40 Top Water Pump Replacement: adım 3, 2 resimden 2.
    • Keeping one hand firmly placed on the device, tug upwards on the water pump until it is separated from the device.

    • The water pump and pipe should now be loose and easy to move as shown.

  4. Keurig K40 Top Water Pump Replacement: adım 4, 2 resimden 1. Keurig K40 Top Water Pump Replacement: adım 4, 2 resimden 2.
    • Pull on the point where the pipe meets the water pump.

    • The pipe will come loose and the water filter will be free and ready to be replaced.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Andrew Bornemann

Üyelik tarihi: 02/08/16

476 İtibar

2 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 6-1, Eyestone Spring 2016 USF Tampa, Team 6-1, Eyestone Spring 2016 üyesi

USFT-EYESTONE-S16S6G1

3 Üyeler

5 adet Kılavuz yazıldı

4 Yorum

I NEED ONE OF THESE! Where can I find one????

G Steve - Yanıt

This is a check valve, not the water pump.

Rick Koen - Yanıt

Please rename this article. The item is not a water pump.

tvyse46 - Yanıt

I viewed this to replace the pump. But after the checkvalve was replaced through these instructions my K40 works like new. Thank you.

Glenn Stanley - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 53

Her zaman: 9,437