Eşyalarını Tamir Et Topluluk Mağaza

Keyboard

Neye ihtiyacın var

  1. Keyboard, Keyboard: adım 1, 1 resimden 1.

    • Before proceeding, power down your Laptop and remove the power cable.

    • Put your computer in front of you and open up the display.

    Düzenle

  2. Keyboard: adım 2, 1 resimden 1.

    • When you've opened up the display. Remove this panel with a spudger as shown in this picture. Do it like that on the other side too until the panel clicks open.

    Düzenle

  4. Keyboard: adım 3, 1 resimden 1.

    • When you've done everything correct, you should see a view like this.

    Düzenle

  5. Keyboard: adım 4, 1 resimden 1.

    • After the previous step, try to put the spudger in between the keyboard and the plastic frame. Then the pins holding it in should click.

    Düzenle

  6. Keyboard: adım 5, 1 resimden 1.

    • When pushing the keyboard try to be careful cause underneath, the keyboard is connected to the motherboard with a ribbon cable.

    • After the previous step there are 4 more plastic pins, for these you can just slide the keyboard out of these.

    Düzenle

  7. Keyboard: adım 6, 1 resimden 1.

    • Be careful when unplugging the ribbon cable from the motherboard.

    • If you need to replace they keyboard and nothing else now is the time to do so.

    • With a spudger remove the ribbon cable from the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Regome

Üyelik tarihi: 01/20/23

767 İtibar

7 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 64