Ana içeriğe geç

Giriş

There are only a few steps that you need to take in order to replace the batteries.

Parçalar

Hiçbir parça belirtilmedi.

  1. First, completely loosen the 9.6 mm Phillips #2 screw on top. There is a plastic washer that holds the screw to the top cover, so it will not need to be taken out.
    • First, completely loosen the 9.6 mm Phillips #2 screw on top. There is a plastic washer that holds the screw to the top cover, so it will not need to be taken out.

  2. After the screw has been loosened, lift the cover off.
    • After the screw has been loosened, lift the cover off.

  3. Completely loosen the 9.6 mm Phillips #2 screw from the battery cover. Once again, there is a plastic washer to hold the screw to the cover.
    • Completely loosen the 9.6 mm Phillips #2 screw from the battery cover. Once again, there is a plastic washer to hold the screw to the cover.

  4. Lift the battery cover to gain access to the batteries.
    • Lift the battery cover to gain access to the batteries.

    • Replace the 3 AA batteries and reverse the steps to put everything back together.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rusbell Gonzalez

Üyelik tarihi: 17-09-2014

219 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-2, Hickman Fall 2014 USF Tampa, Team 1-2, Hickman Fall 2014 üyesi

USFT-HICKMAN-F14S1G2

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 5

Son 30 Gün: 16

Her zaman: 1,952