Ana içeriğe geç

KidzLane Walkie-Talkie Press-to-speak button Replacement

Neye ihtiyacın var

  1. KidzLane Walkie-Talkie Press-to-speak button Replacement, Press-to-speak button: adım 1, 1 resimden 1.
    • Place the Walkie-Talkie on a flat surface-preferably a table or a desk.

    • Flip the device over to where you see four screws in each corner.

    • Make sure you take out the batteries before proceeding.

  2. KidzLane Walkie-Talkie Press-to-speak button Replacement: adım 2, 2 resimden 1. KidzLane Walkie-Talkie Press-to-speak button Replacement: adım 2, 2 resimden 2.
    • Using your Phillips head screwdriver, unscrew all four 4mm screws from each corner.

  3. KidzLane Walkie-Talkie Press-to-speak button Replacement: adım 3, 1 resimden 1.
    • Once you have unscrewed all four corners, open the device so it will be in two parts.

    • As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.

    • Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).

    • Separate these screws from the other four since they are different sizes.

  4. KidzLane Walkie-Talkie Press-to-speak button Replacement: adım 4, 2 resimden 1. KidzLane Walkie-Talkie Press-to-speak button Replacement: adım 4, 2 resimden 2.
    • Take the circuit board out of the plastic casing.

    • Use the soldering device to iron the silver box (press-to-speak button), and then remove it from the circuit board.

Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

Amin

Üyelik tarihi: 02/13/16

642 İtibar

5 adet Kılavuz yazıldı

Ekip

IUPUI, Team 1-1, Wilson Spring 2016 IUPUI, Team 1-1, Wilson Spring 2016 üyesi

IUPUI-WILSON-S16S1G1

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 894