Ana içeriğe geç
  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. Locate the battery's power ribbon. Use nylon spudger to disconnect the ribbon from the mother board.
    • Locate the battery's power ribbon.

    • Use nylon spudger to disconnect the ribbon from the mother board.

  3. Peel battery away. Battery is glued and may cause permanent damage if bent.
    • Peel battery away.

    • Battery is glued and may cause permanent damage if bent.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

aaa

Üyelik tarihi: 06-10-2016

671 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 2-3, Sullivan Fall 2016 USF Tampa, Team 2-3, Sullivan Fall 2016 üyesi

USFT-SULLIVAN-F16S2G3

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 15

Son 30 Gün: 116

Her zaman: 2,655