Giriş

Use this guide to remove the back case.

Parçalar

Hiçbir parçaya gerek yok.

Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

Yorum Ekle

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

Yorum Ekle

Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
  • Firmly grasp and pull back casing off.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Dustin Rodgers

Üyelik tarihi: 05-10-2010

50 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 7-51, Amido Fall 2010 Cal Poly, Team 7-51, Amido Fall 2010 üyesi

CPSU-AMIDO-F10S7G51

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,380