Giriş

  1. Front and Back view of camera. Use a Philips Head screw driver to unscrew the sides of the camera. There are six screws total.
    • Front and Back view of camera. Use a Philips Head screw driver to unscrew the sides of the camera. There are six screws total.

    Yorum Ekle

  2. Use a Philips Head screw driver to unscrew the sides of the camera. There are two screws on each side except for the top of the camera. Carefully remove face plate of camera. Place alongside near screws.
    • Use a Philips Head screw driver to unscrew the sides of the camera. There are two screws on each side except for the top of the camera. Carefully remove face plate of camera. Place alongside near screws.

    Yorum Ekle

    • To get to control buttons, use a Phillips Head screw driver to unscrew the three screws near lens.

    Yorum Ekle

    • Unscrew the screw near the rechargeable battery compartment. The metal piece then can be removed.

    Yorum Ekle

    • Remove additional screws near lens.

    Yorum Ekle

    • This is what the camera should look like with all screws are removed. Flip camera over to carefully remove the screen cover.

    Yorum Ekle

    • Remove buttons from back case of screen cover. Replace with new set of buttons.

    Yorum Ekle

    • Follow the steps in reverse order to reassemble the camera. Now you can take beautiful pictures again!

    Yorum Ekle

Sonuç

Once you purchase these parts, follow the given instructions. To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Elizabeth

Üyelik tarihi: 28-01-2015

279 İtibar

2 adet Kılavuz yazıldı

Takım

Penn State, Team 1-2, Kaschak Winter 2015 Penn State, Team 1-2, Kaschak Winter 2015 üyesi

PSU-KASCHAK-W15S1G2

1 Üye

2 adet Kılavuz yazıldı

Bir Yorum

como cambio la tapa de la bateria y pin de carga

Dario - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 266