Giriş

The button pad lets the user control actions on the LCD screen. The arrow pad allows the user to move up, down, left, right, and select.

  1. Slide the door on the bottom of the camera in the direction of the open symbol with your finger.
    • Slide the door on the bottom of the camera in the direction of the open symbol with your finger.

    • Release and the door will pop open.

    Yorum Ekle

  2. Slide the battery out.
    • Slide the battery out.

    Yorum Ekle

    • Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.

    Yorum Ekle

    • Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string.

    • Push up so that the string starts to come out of the top of the loop.

    • Grab the string from above the loop and pull.

    Yorum Ekle

    • Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further.

    Yorum Ekle

    • Separate the two pieces of the loop and pull the lens cover up in between them.

    Yorum Ekle

    • Pull the lens cover and the sting will come out of the metal slab.

    Yorum Ekle

    • Flip open the door on the right side of the camera, when looking at the LCD screen.

    • This door has a memory card and A/V OUT symbol on it.

    Yorum Ekle

    • Gently push SD/MMC to eject.

    Yorum Ekle

    • Pull SD/MMC out of the camera.

    Yorum Ekle

    • Place lens cover back on the lens to prevent scratches or debris but leave string detached.

    • Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side.

    Yorum Ekle

    • Pull the back cover away from the front cover.

    • You may need to use a plastic opening tool as a wedge if it does not come apart by easily.

    Yorum Ekle

    • Separate the back cover from the front cover.

    Yorum Ekle

    • Remove two Phillips #00 screws from the inside of the button pad on the back cover.

    Yorum Ekle

    • Remove the metal piece shown.

    Yorum Ekle

    • Remove the black ring from the back and the white button pad will fall out from the front.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kirsten Price

Üyelik tarihi: 17-09-2014

343 İtibar

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 7

Her zaman: 348