Giriş

Back Cover Teardown guide must be used first to get inside the camera. Later, soldering guides will be used.

  1. Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
    • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

    Yorum Ekle

  2. Turn camera so the bottom is facing up and the front is facing away.
    • Turn camera so the bottom is facing up and the front is facing away.

    • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

    • Back cover is now unscrewed an can be removed.

    Yorum Ekle

    • Have the back of the camera facing up.

    • Unscrew the 6.2mm Phillips screw next to the viewfinder.

    • The back cover is now unscrewed. Lift up and pull the cover off evenly.

    Yorum Ekle

    • The capacitor is located at the bottom center of the camera.

    Yorum Ekle

  3. Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Michelle

Üyelik tarihi: 04-04-2011

86 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 25-28, Garner Spring 2011 Cal Poly, Team 25-28, Garner Spring 2011 üyesi

CPSU-GARNER-S11S25G28

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 11

Her zaman: 1,767