Giriş

Use this guide to replace the front cover.

Parçalar

Hiçbir parçaya gerek yok.

  1. Have the camera facing up and the flash closest to you.
    • Have the camera facing up and the flash closest to you.

    • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

    Yorum Ekle

  2. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
  3. Flip camera to other side-with flash farthest from you.
    • Flip camera to other side-with flash farthest from you.

    • Unscrew top two 6.2mm Phillips screws on this side.

    Yorum Ekle

    • Turn the camera so the bottom is facing up with the front facing away.

    • Unscrew the 6.2mm Phillips screw on the top right.

    • The front cover is now unscrewed and should be lifted up evenly and removed.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Michelle

Üyelik tarihi: 04-04-2011

86 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 25-28, Garner Spring 2011 Cal Poly, Team 25-28, Garner Spring 2011 üyesi

CPSU-GARNER-S11S25G28

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 5

Her zaman: 1,683